DIY Power Meter using T-Display S3 (easiest way to connect modules)
Hello! In this video I am measuring the voltage and current of the external circuit. This is a power meter project but I also added time, temperature and a few more surprises to it. T-display have one tiny connector which is used to connect different I2c modules.
Soldered company produce many different modules and sensors that use the same connector. On their site you can check them: https://soldered.com/categories/easyc-2/
In this project I am using the INA219 module to measure voltage and current. I am using the RTC module to show time on display, i am using a linear potentiometer and BMP180 temperature and pressure sensor.
I wanted to achieve a "multimeter " look. I spended lots of time, but now i am quite happy, you can find code (Arduino IDE) here: https://github.com/VolosR/PowerMeterT...
You can BUY T-Display Board here: https://www.lilygo.cc/0cAg0r
If you want you can support my work, you can buy me coffee here :
https://ko-fi.com/volosprojects
Thank you! This was fun project and conecting thease modules was so easy. I will use them for sure.
#esp32, #ArduinoIDE, #PowerMeter, #TDispslay