DIY Roof Insulation Made Simple | Tear vs Cut - Which Wins?
• How to Cut & Install Isotherm Insulation L...
VIEW THE NEW VOICE OVER VIDEO REPLACEMENT
Isotherm Insulation is a polyester Insulation. There are many benefits to installing Isotherm Insulation in your home.
Read more here https://roofinsulations.co.za/isotherm/
Polyester Roof Insulation is one of the best DIY projects for homeowners.
Unlike most traditional Roof Insulation products, The Isotherm Is Dust Free and allergy-free. As a result, Isotherm Insulation is ideal for the DIY GUY TO INSTALL.
However, in most cases, consumers are clueless in How to Cut Isotherm Insulation. Although Isotherm is a roll form insulation, most people try to cut the insulation with Sheep Shears or Stanley knives.
This method of cutting Isotherm is time-consuming. As a result, we will show you how to Cut The Isotherm Insulation with only your hands.
Once we know the gap between the beams we add on 75mm and Tear the Isotherm. In fact, tearing the Isotherm Roof Insulation is so simple as long as one keeps the hands tight as you tear.
The simple procedure in tearing the Isotherm Insulation speeds up the process substantially. As a result, one can cut/tear enough Roof Insulation for a 200 Sq 2 meter home in under 20 mins.
The result will be many insulation panels that are slightly wider than the beams by a width of 1200mm. As a result, we will lay these simple small sections of insulation end to end in the roof space.
At the same time ensuring that there are no gaps between the joints in the insulation.
Electrical wiring were possible must be lifted above the insulation for safety.
Importantly all Down-lights must have a breathing hole cut above them. It is important that the heat from the downlights can be lost into the roof space.
How to Cut Isotherm a question asked by many homeowners who what to tackle the DIY Isotherm Insulation option. For more info on how to install Roof Insulation visit https://roofinsulations.co.za/isotherm/.
In fact, we distribute and install Ceiling Insulation as well as all other Roof Insulation products. For more information on how to cut Roof Insulation products like Aerolite visit our website.
Polyester Roof Insulation products like Isotherm cant be cut like traditional insulation products. As a result, many homeowners trying the DIY Ceiling Insulation route have a problem trying to cut Isotherm Insulation.
The best solution for cutting Isotherm is actually to tear the Isotherm Insulation. Years of cutting with industrial scissors, etc. Resulting in many hours of wasted time, we have discovered that splitting the Isotherm Rather than cutting is far more efficient.
In fact, by tearing the Isotherm Insulation saves 80% of the time needed to install.
When Cutting the Insulation this way means that each line can be cut to the correct width when installing. DIY Ceiling Installation made easy with this handy video on how to install Isotherm.