Triangular PYRAMID in Fusion 360 ||
#prrobotics #fusion360 #tutorialsonfusion360 #pyramidinfusion360
To make the Triangular follow the steps:
1. Draw a line of required length
2. Draw another line on the end point of 1st line at an angle of 60 degrees and similarly draw the third line as shown
3. After drawing this equilateral triangle, drop the perpendicular as shown
4. Now select the offset plane option and draw an offset plane at the intersection of all three perpendiculars.
5. Now draw a line on the offset plane which is perpendicular to the triangle.
6. At last select all the sections of triangle and the end point of line which is perpendicular to the triangle, select the LOFT option.
Your TRIANGULAR PYRAMID is ready. If you have any doubt, do let me know in the comment section. :-)
#PRROBOTICS #Fusion 360
**********************************************
Follow us on INSTAGRAM:
/ prrobotics
Subscribe us on YOUTUBE:
/ prrobotics
**********************************************
Watch our other Short tutorials (duration is less than 1 minute):
1. How to make PYRAMID with square base:
• Pyramid with square base in fusion 360 || ...
2. How to make cone :
• Cone in fusion 360 in 30 seconds || #PRROB...
3. Smooth Edged Cube:
• Video
Checkout our Arduino Projects as well:
1. 3D printed WiFi clock:
• #71 Wifi Clock || 3D Printed || Arduino |...
2. Convert OLD RC car into bluetooth car:
• #69 Reuse old Toy Car using arduino | PR R...
3. HomeMade Joystick mouse for PC/LAPTOP:
• #68 DIY pc mouse using arduino || PR ROBOTICS
4. Bluetooth Home Automation:
• #65 Bluetooth Home Automation PCB || PRRO...
5. Digital Spirit Leveler:
• #59 Digital Spirit leveler || PR ROBOTICS ...
All the videos on this channel can be used for educational purpose only. Any use or copying of this content in any manner, without the prior written permission of the AUTHOR may result in legal penalty under Copyright Act.
Thanks for watching 🤗
#PRROBOTICS #fusion360 #triangularpyramid #pyramid #pyramidinfusion360 #3dpyramid