Replace Jeep Wrangler JK Header Seal and water leak test
This time on @AutoEdits I'll show you how to replace the windshield header seal on the Jeep Wrangler JKU. It will require a couple of extra bits like some weather strip adhesive, 3/16" Rivets and a 3/16" drill bit. I also used a stripe eraser on my drill motor to make fast work of removing the old adhesive from the original weather-strip. Plus some adhesive remover or denatured alcohol to clean the surface.
The weather strip adhesive and stripe eraser can be purchased at your local auto parts store, or at this link: https://www.amazon.com/shop/autoedits...)
And the rivets, rivet gun, drill bits and foam tape can be scooped up at your favorite hardware store.
This first link is to the AutoEdits Amazon shopping list with the parts I used in this video, including both Door Seals from Mopar (recommend) and Omix plus the Header Seal from Mopar.
https://www.amazon.com/shop/autoedits...
The following is the best prices I found on the MOPAR seals I recommend from Rock Auto:
https://www.rockauto.com/en/moreinfo....
https://www.rockauto.com/en/moreinfo....
https://www.rockauto.com/en/catalog/j...
Thanks so much for watching!
Join this channel to get access to perks:
/ @autoedits
00:00 Introduction
01:34 Parts Overview
03:39 Old Seal Removal
05:21 New Seal Install
07:37 Water leak test
11:49 Tip on draining water
#jeep #header #weather