How To: Access the Window Regulator Panel inside a VW Transporter Door for Sound Deadening & Repairs
How To: Access the Window Regulator Panel inside a VW Transporter Door for Sound Deadening & Repairs
This useful 'How To' will provide a complete guided walkthrough on the steps required to release the metal window regulator panel behind a VW T6 Door card and will show you 'How To' support and secure the window so that you are able to complete any interior Sound Deadening or replace the window mechanism.
See the steps below:
00:00 - Start of Video.
Step 1 - 00:23 – Introduction.
Step 2 - 00:57 – Tools You'll Need.
Step 3 - 01:59 – Removing the mini grommets and loosening the 10mm Bolts.
Step 4 - 03:42 – Securing the window with Duct Tape or an official tool.
Step 5 - 05:40 – Removing the 10mm bolts around the regulator panel.
Step 6 - 06:25 – Removing the panel and internal fixings/plugs.
Step 7 - 09:42 – Sound Deadening Completed - Reconnecting the plug and securing the metal panel.
Step 8 - 12:17 – Double-check connections - Instructions are given for the next process.
Step 9 - 13:04 – Winding up the regulator to reconnect with the glass, removing the duct tape and securing the window by tightening the 10ml bolts back up.
Step 10 - 15:21 – Closing run-through and sign-off.
If you have an issue you're struggling with in your vehicle or you just require some guidance, get in contact with us via the comments section and let us know what How To's you want us to do.
#AdvancedInCar #vw #volkswagen #vwt6 #howto #doors #sounddeadening #soundproofing #upgrades #walkthrough