"Oppo A57 LCD Light Problem Solution | No Backlight, Dark Screen Fix 2025"
💡 Oppo A57 LCD Light Problem Solution | Backlight Not Working | Dark Display Fix | 2025
This video shows the complete solution for Oppo A57 LCD light issues, such as:
Display turns on but screen is dark
Backlight not working
Faint image visible under strong light
Screen brightness not functioning
LCD working but no light
These symptoms point to a backlight failure, usually caused by a faulty backlight IC, damaged filters, blown diode, or broken LCD light lines.
We cover:
How to test LCD light voltage
Checking LCD light filters and coils
Jumper ways for missing LCD light tracks
Replacing or reflowing the backlight IC
Full backlight section testing using a multimeter
🧰 Required Tools:
Digital Multimeter
Hot Air Station
Jumper Wire
Soldering Iron
UV Insulation Glue (optional)
Schematic Layout (if available)
📌 Applies to Oppo A57 (CPH1701 / CPH2387) and similar models using the same display architecture.
📢 Subscribe for more phone repair videos including display, charging, mic, network, dead boot, and touch solutions for Oppo, Vivo, Xiaomi, Infinix, Itel, and more.
🔢 30 Step-by-Step Instructions:
Turn off phone and remove SIM tray.
Gently open back panel.
Remove screws and disconnect battery.
Detach LCD connector and inspect it.
Test with new working LCD to confirm it’s not a panel issue.
Check for faint display using a flashlight.
If display is visible under light, backlight is not working.
Use multimeter to test LCD light line in diode mode.
Identify VLED+ and GND pins at LCD connector.
Trace the backlight line from connector to filter.
Test the continuity of light filters and coils.
Replace open filters or inductors.
Check for missing voltage on light line (usually 18–22V).
Use ZXW or any layout to identify LCD light components.
Test the backlight IC input and output pins.
Replace or reflow the backlight IC if voltage is missing.
Test backlight enable signal from CPU/PMIC.
Jumper broken light lines if continuity is lost.
Avoid shorting high voltage lines during jumper.
Use flux and clean soldering tips.
Check for short around backlight capacitor.
Remove any shorted diode in backlight line.
Reconnect LCD and battery.
Power on and test for backlight.
Use display brightness settings to confirm fix.
Final test with camera and system apps.
Reassemble device carefully.
Screw all panels back in place.
Do a last full function test.
Return device after confirming successful repair.
📢 Hashtags:
#OppoA57
#LCDLightProblem
#BacklightFix
#DarkScreenFix
#OppoDisplayRepair
#MobileRepair2025
#BacklightJumper
#OppoScreenLightFix
#HardwareRepair
#NoBacklightSolution