DIY Folding Sawbuck
How to easily build a sturdy and folding sawbuck for less than 20 € or $. Takes about 1-2 hours to complete.
Sizes and measures in imperial units:
10 pieces of 4 ft lumber boards, I used 2x4's.
Three 5 inch 5/16 bolts
5/16 washers
5/16 nuts
3½ inch outdoor screws (I used bit too short screws which I changed later)
Measure 29 inches from the long end of the diagonal edge.
Drill 5/16 inch hole in the middle of the 29 inch marks.
Measure 28.5 inches from the long end of the diagonal edge.
Music: "Bama Country" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/b...