Dynaudio Xeo - Getting started with the Dynaudio Xeo digital audio system (English)
All you need to do to get your Xeo wireless speakers up and running is power them up. Connect the mains cable to the speaker and the socket, switch the speaker on. Job done!
The left speaker will be connected to left during installation and the right to right and both speakers will be assigned to one of three rooms. The Xeo transmitters’ job is to send the music out wirelessly. It transmits music wirelessly to the speakers providing inputs for one digital and two analog sources as well as a USB port for audio signals and a power supply from the PC. The Xeo transmitter is linked with conventional HiFi components via a cinch/RCA audio cable. The power supply unit provides power as required. The transmitter should be set to switch position A. Now use the remote control to switch the speakers on. As soon as the speakers are set to channel A and the blue LED is on they are ready for action. Sources too can be selected via the remote control from the speaker. Each of the three stands for one of the inputs. The volume can be controlled from the speaker in just the same way as switching form one source to the next in order to play something different.
To move to a different room first switch the speakers off, disconnect the power cable then move the Xeo to its new position. The speaker will be ready for action straight away in the other room.
Read more about Dynaudio Xeo http://www.dynaudio.com/home-audio/xeo
Follow Us
► YouTube https://www.youtube.com/user/Dynaudio...
► Facebook / dynaudiogroup
► Twitter / dynaudio
► Instagram / dynaudio
► LinkedIn / dynaudio-as
Visit http://www.dynaudio.com