3D Printed Follow Focus for 15mm rails DIY
The biggest change I made to the original design
is the main gear, that previously had much bigger pitch, so It didn’t work well with 0.8 gears
found on all cine lenses. That, and removed a logo from the lid and change the size of one of the rods from 5cm to 3cm.
Link to all parts with my changes:
https://www.thingiverse.com/thing:592...
Link to the original design:
http://www.thingiverse.com/thing:3476019
*I might have used lithium based grease, don't do that because it can eat the plastic,
use only Silicon based grease*