Build an LED Strip Logo with the Enttec OCTO Mk2
I used the NEW OCTO Mk2 to control 2,000 LED Pixels for our new Church Stage Design. This was a crazy project, so let me know you how you can build this for yourself.
Erics Video! Laser Cutter and more: • I Turned a $500 Laser Cutter into a $10,00...
Purchase the Enttec OCTO Mk2: https://amzn.to/3SKhf8L (Affiliate Link)
I'd love to answer your Questions or hear your feedback on this video. Leave a Comment, or Send me an email! [email protected]
Resources:
Did you know? I offer Personalized Training, Production Consulting/ Coaching. All the info can be found at www.CrazyAmazingDesigns.com/production-consulting-training
*Quickly set up a new computer with my ProPresenter 7 Template.
Includes Multi-view, +Pre-Built Looks, Themes, Sermon Lower Thirds, and Macros to control it.
https://www.crazyamazingdesigns.com/s...
00:00 - Stage Design Build for Youth Retreat
00:50 - Using the 3D Model to Laser Cut the LOGO
01:14 - NEW Room Design in Fusion 360
01:50 - A Look at the Final Design
02:43 - Octo Mk2 Network Control Setup
03:03 - I'm Unable to Connect to the OCTO Web Interface:
05:45 - Using Enttec EMU to find devices on the Network
07:00 - Updating Settings on the OCTO Web Interface
07:55 - Connecting OCTO to the Building Network
08:43 - Reset OCTO to Factory Settings
09:41 - Crazy Amazing Productions
10:37 - Wiring and Soldering LED Pixels to build a Stage Design
15:21 - Voltage and Power
16:03 - Using large Wire breaks LEDs, I used 24AWG Stranded Wire
16:55 - Control with Enttec ELM and Resolume Arena.
17:24 - 8 Universe License Included with the OCTO
17:36 - Subscribe and Thanks for Watching!