Installation: 2 1TB Hard Drives into Firewire RAID Enclosure
Twitter:
/ tecbookpro
Website:
http://tecpro.co.nr/
This is a video of me installing 2 1TB "1000GB" Samsung 7200RPM Hard Drives into the RAID+ Firewire 800 Enclosure which will be setup as a RAID 1 "Mirror" to keep all of my Data safe "Backed up"
UNBOXING VIDEO: • Unboxing: RAID+ Dual Drive, FireWire 800 E...
Specs of the Hard Drive:
Drive Configuration
Capacity * 1TB
Interface Serial ATA 3.0Gbps
Buffer DRAM Size 32MB
Byte per Sector 512 bytes
Rotational Speed 7,200 RPM
Performance Specifications
Average Seek time (typical) 8.9 ms
Data Transfer Rate / Media to/from Buffer(Max.) 175 MB/sec
Data Transfer Rate / Buffer to/from Host(Max.) 300 MB/sec
Average Latency 4.17 ms
Drive Ready Time (typical) 12 sec
Reliability Specifications
Non-recoverable Read Error 1 sector in 10^15 bits
Start/Stop Cycles 50,000
MTBF 1,200,000 POH
Acoustics
Idle 2.70 Bel
Performance Seek 2.90 Bel
Environmental Specifications
Temperature / Operating 0 ~ 60 °C
Temperature / Non-operating -40 ~ 70 °C
Humidity (non-condensing) / Operating 5 ~ 90 %
Humidity (non-condensing) / Non-operating 5 ~ 95 %
Liner Shock (1/2 sine pulse) / Operating 70 G
Liner Shock (1/2 sine pulse) / Non-operating 300 G
Altitude (relative to sea level) / Operating -300 to 3,000 m
Altitude (relative to sea level) / Non-operating -300 to 12,000 m
Power Requirements
Voltage +5V±5%, +12V±10%
Spin-up Current (Max.) 2.4 A
Seek (typical) 8.6 W
Read/Write (typical) 7.9 W
Idle (typical) 7.7 W
Standby (typical) 0.8/1.2 W
Sleep (typical) 0.8/1.2 W
Physical Dimension
Height (Max.) 26.1 mm
Width 101.5 mm
Length 147.0 mm
Weight (avg.) 640 g
Features:
Features
• Formatted capacity : 1 TB
• Serial ATA 3.0Gbps Interface Support
• Improved recording stability over temperature with PMR
• Advanced dynamic FOD control for best data integrity
• Intelligent compensation of external disturbance
• SATA Native Command Queuing Feature
• Device Initiated SATA Power Management
• Staggerd Spin-up Support
• Rotational vibration sensor
• Environment friendly product with RoHS compliance
• Improved performance with dual-ARM based firmware
• ATA S.M.A.R.T. Compliant
• ATA Automatic Acoustic Management Feature
• ATA 48-bit Address Feature
• ATA Device Configuration Overlay Feature
• NoiseGuard™
• SilentSeek™
Target Application
• storage servers, enterprise backup, RAID servers