Wood lathe - 6, faceplate, part 2.

Опубликовано: 09 Сентябрь 2026
на канале: AlfFisher

33,582

177

Continued.

Episode One:    • Как сделать ТОКАРНЫЙ СТАНОК по дереву.1.0
Episode Two:    • Токарный по дереву. 2 - Планшайба
Episode Three:    • Токарный станок - 3. Трезубец и резьбовое ...
Episode Four:    • Самодельный токарный по дереву - 4 серия. ...
Episode Five:    • Самодельный токарный по дереву - 5 серия. ...

Faceplate. Disc - 8 mm thick laminate flooring, disc diameter 110 mm.
Faceplate sleeve - glued with PVA glue from three layers of pine board, 12 mm thick and 65 mm wide, additionally tightened with four 4x35 screws.
The mounting hole was drilled with a 14 mm diameter spade bit. A furniture confirmat screw shortened to a length of 22 mm was used as a clamping screw.