Home Assistant install on Raspberry Pi
Install Home Assistant Smart Home Automation on Raspberry Pi
http://raspberrypi4u.blogspot.com/201...
There’s three options to install Home Assistant on a Raspberry Pi.
Manual installation.
Following this guide doing each step manually. This is highly recommended as a first installation since you get a good overview of the installation.
Hassbian image.
Basic installation with the same settings as following the manual installation guide. Some additional software is preinstalled to make installation quicker and easier. Installation uses homeassistant user.
All-in-One Installer.
Fabric based installation script that installs and compiles many of the things an advanced Home Assistant install is likely to need. Installation uses hass user.
We use All-In-One Installer method to install.
Because there is including support for MQTT with websockets, Z-Wave, and the Open-Zwave Control Panel.
The only requirement is that you have a Raspberry Pi with a fresh installation of Raspbian Jessie connected to your network.
Run the following command
$ wget -Nnv https://raw.githubusercontent.com/hom... && bash hass_rpi_installer.sh
LINE : adunfong
FaceBook : / adun.nantakaew
email: [email protected]
http://softpowergroup.net/