How to turn ON/OFF Hikvision IP camera using NVR?
To turn on or off the smart light or other features on a Hikvision IP camera, such as those with full-color night vision, you typically need to access the camera's settings through its configuration interface. Here's a step-by-step guide:
---
Method 1: Using the Hik-Connect App
1. Download the Hik-Connect App:
Install the Hik-Connect app on your smartphone (available for iOS and Android).
2. Add Your Camera:
Log in to your account and add your camera by scanning the QR code or entering the serial number.
3. Access Camera Settings:
Tap on the camera you want to configure.
Go to Settings (usually represented by a gear icon).
4. Turn Smart Light On/Off:
Look for options like Smart Light, Supplemental Light, or Illuminator.
Toggle the switch to turn the smart light on or off.
5. Adjust Light Settings:
Some cameras allow you to set the smart light to Auto (triggered by motion), Always On, or Off.
---
Method 2: Using a Web Browser (via SADP or Camera IP)
1. Find the Camera's IP Address:
Use the SADP tool (available on Hikvision's website) to locate your camera on the network and find its IP address.
2. Log in to the Camera's Web Interface:
Open a web browser (e.g., Chrome, Firefox) and enter the camera's IP address.
Log in with your username and password (default is usually admin and your password).
3. Navigate to Light Settings:
Go to Configuration, then Image or Display settings.
Look for options like Illuminator, Supplemental Light, or Smart Light.
4. Turn Smart Light On/Off:
Toggle the setting to enable or disable the smart light.
You may also have options to set the light to Auto, On, or Off.
---
Method 3: Using the NVR (Network Video Recorder)
If your Hikvision camera is connected to an NVR:
1. Log in to the NVR:
Access the NVR's interface directly or via a monitor connected to it.
2. Find the Camera Settings:
Navigate to Camera Management or Camera Settings.
3. Adjust Light Settings:
Locate the smart light settings for the specific camera and turn it on or off.
---
Additional Tips:
Motion-Activated Light: If you want the smart light to turn on only when motion is detected, enable the Motion Detection feature and link it to the light settings.
Schedule: Some cameras allow you to set a schedule for the smart light (e.g., turn on only at night).
Reset to Defaults: If you're unsure about the settings, you can reset the camera to factory defaults and reconfigure it.
---
If you encounter any issues, refer to the user manual for your specific camera model or contact Hikvision support for assistance.