My Robot Time MRT Brain Goma Kids - Programming with Controller
My Robot Time: Programming Controller (GOMA Brain A/B)
Today I will show how to program a robot, so we can have a control with a remote.
What steps to make::
1) Turn ON main board. If you have battery life like "3", then it might not work, change battery and go to step2 (after turn on)
2) Connect your CARD READER to slot CARD
3) Press "M" (mode) on the mainboard (it will turn green light)
4) Take a cart that use remote controller, example: Multiple card M.016, WALL-E that I am showing; and slide it (you will hear a sound if correct)
5) press M again (to get out from programming mode), press PLAY button (so the program will "save") and TURN OFF main board.
6) Turn ON main board, press R (remote), you should see some number (like 15, not sure what it is - but do not worry) - press R again until you will see your REMOTE CONTROL number (my RC had number 8)
7) Once you see your number - press M (mode) and press PLAY.
Music: Find by Hotham
====================================================
Find by Hotham | / hothammusic
Music promoted by https://www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
https://creativecommons.org/licenses/...
====================================================