Centering the blade assembly in the Alternajar for your blendtec blender
if you experience a vibrations in your blender during blending, there are several possible variables. I would start by trying to center or improve the center location of plate assembly. And this can be done by slightly loosening, the blade assembly, bottom plate, and then moving it into the center by eyeballing it. There is no real signs to that. Vibrations can come from a various different variable things things like the motor axle is out of alignment. And that would be horrible but it is a possibility. The other possibility is placement of food. The other possibility is well I don’t know really anyways you can try to improve it if your motor is starting to move from walk around on the countertop by either putting a rubber mat underneath of it, or at least cleaning the counter, tap the counter top to make sure that there is no flour, breadcrumbs, or that it’s not wet, which is not good for the motor anyways because it will suck in all the debris into the inside of the motor housing.  so follow these instructions and if you have any questions then give me a phone call at 801-623-3225 or visit our website at www.alternajar.com