Installation and setup of DHCP service in Windows Server 2022
First, it should be said that DHCP stands for "Dynamic Host Configuration Protocol". DHCP server is one of the IP address assignment servers in the network, which assigns IP addresses to all the required devices according to the range in which it is set. DHCP uses the udp protocol. It uses port 67 for the server and port 68 for the clients.
Why should we use DHCP?
1- If we use the DHCP service, we will find out which IPs are used and which IPs are not used.
2- In large networks, we know to which systems we have assigned IP.
3- If the IP is set manually, there is a high probability of error.
4- IP management is easier by using DHCP.
We can assign IP to hosts or clients in two ways:
The first method is manual, which is called static IP, and this method is useful when the number of clients is low.
The second method dynamically or automatically clients get IP. This method is very useful for organizations because giving IP manually in an organization or a large company is time-consuming.
To install and set up dhcp in Windows Server, the following three steps must be performed:
Installing the DHCP service
Configuration and configuration of the DHCP server
Configure and configure the DHCP client
جهت مطالعه بیشتر، بر روی لینک زیر کلیک کنید
https://hivanetwork.ir/blog/install-d...