Fusion 360 Tutorial — Beginner To Advanced — How To Create a Mold— Part 2

Опубликовано: 04 Октябрь 2024
на канале: Lars Christensen

55,254

703

In this tutorial, I will show you how I would create a plastic injection mold from start to finish. Beginner to Advanced — Part2

Table of content:
Video 1— Intro & Model Paddle Part(Beginner)
   • Fusion 360 Tutorial — Beginner To Adv...
Video 3— Create Mold Base
   • Fusion 360 Tutorial — Beginner To Adv...
Video 4— Create Sprue & Ejection
   • Fusion 360 Tutorial — Beginner To Adv...
Video 5— Add Hardware & Add Motion
   • Fusion 360 Tutorial — Beginner To Adv...

Want to learn more about Fusion 360? Check out this link:
http://autode.sk/2bZypPp

Dataset
http://a360.co/2tAWjHj

Videos:
Fusion 360 Tutorial: Get a Grip on Components, Bodies & Assemblies    • Fusion 360 Tutorial: Get a Grip on Co...
Fusion 360 Tutorial — How to get a handle on Assembly and Joints in Fusion    • Fusion 360 Tutorial — How to get a ha...

Shortcuts:
S=Model Toolbox
Q=Push/Pull
C=Circle
D=Dimension
L=Line
X=Construction
P=Project
Ctrl+Z=Undo
J=Joint

(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)

My email:
[email protected]

Want to learn more about Fusion 360? Check out this link:
http://autode.sk/2rXApL2

Free CNC Handbook:
https://www.larschristensen.org/free-...

LET'S CONNECT:
  / lars_cadcam
  / mrlarschristensen
  / cadcamstuff

MY SITE:
https://www.larschristensen.org/