Design of LEGRABOX BLUM cabinets with drawers. DYNALOG/DYNAPLAN software
A program for designing cabinets with BLUM hardware.
This program can be downloaded from this link:
https://e-services.blum.com/dynalog
DYNALOG 403 MB
Our website: http://tdtandem.ru/
Information about LEGRABOX drawers: http://tdtandem.ru/section?id=12
This video shows how easy and effortless it is to design cabinets with a fitting for LEGRABOX pure or free drawers, as well as a fitting for fronts.
It is recommended that using the PRO+ method in the program allows you to interchange identical drawers, which provides a distinct advantage during installation and subsequent use of the furniture.
Using a TIP-ON BLUMOTION spacer solves three key issues:
1) If you insert a spacer in the BLUMOTION program, the bottom guide will touch the cabinet bottom. If it's not inserted carefully (before cabinet assembly), it will prevent the side panel from pressing against the bottom. The cabinet will have a gap at the bottom, making it impossible to level the cabinet.
2) You can keep in mind the measurement from the bottom of the front to the first hole for the front fastening (LEGRABOX has its own value, for example, 67 mm, TANDEMBOX has its own value, and METABOX has its own value when used with the BLUMOTION option). You don't have to reconfigure the front drilling template for all motion technologies.
3) One value applies to all BLUMOTION, TIP-ON BLUMOTION, and SERVO-DRIVE motion technologies. If desired, you can retrofit, for example, a TANDEMBOX drawer with the TIP-ON BLUMOTION option without changing the spacer.
You can also automatically assign a spacer for such a crucial element as the façade stabilizer, which is needed to pull the façade to the bottom to prevent a gap.
This allows full adjustment of the façade up, down, and tilt. Using a screw-on bracket to support the bottom to the façade (even with adjustment grooves) prevents full adjustment.
Similarly, this program creates a spacer for TANDEMBOX antaro and METABOX drawers.