Logitech Driving Force GT Encoder fix
Hello Guys,
This video is for Logitech driving force gt Encoder Fix. My encoder board was dameged. So I try to fix it. And I made this encoder design.
Use ABS Filament to print parts.
My DFGT encoder disk was 60ppr. But I designed 30ppr disk too. I tried 30ppr disc. And, It worked at the rear of the motor. But, 60ppr disc is more sensitive. Both of them worked.
00:00 3D Printing Settings
01:25 Prepearing Encoder mount
04:20 Prepearing Encoder Sensor
05:32 Calibration Failure
06:23 Mounting Encoder system
11:00 First test
14:13 Result
What you need:
-Encoder Board : CJCMU-83
https://tr.banggood.com/CJMCU-83-AEDR...
I bought from here but ı think, You can find cheaper on aliexpress.
https://pt.aliexpress.com/item/330006...
-Connector Cable : https://www.ebay.co.uk/itm/2750823944...
I didn't buy from this shop. I used the original Connector.
-5mmx5mmx1.4mm Mirror : https://www.ebay.co.uk/itm/4031859200...
I didn't buy from this shop. It is an example.
-M3X15mm Philips Head Bolt
-M3 Nut
-Download Files:
Driving Force Gt:
https://makerworld.com/en/models/1968...