How to create stm32 project use stm32cubeide | STM32 | stm32cubeIDE | Proteus |STM32 project
#stm32 #stm32cubeide #project #proteus8
*Steps to create the project:
1. Choose File-- New -- STM32 Project.
2. Target section-“Commercial Part Number“ box enter "STM32F103C8T6” and select the part from the list on the Right side.
3. choose a project name.
4. press Finish button.
*Pinout and configuration:
1.define output and input pin.
2.select system core-- GPIO-configuration-change the setting of input PIN TO pullup from 'GPIO Pull-up/Pull-down'
3.Under System core choose RCC--Set High speed clock(HSE)as crystal ceramic resonator.
4.set the clock frequency(Places where changes to be made)
5.When all settings are done, press ctrl+s to save the setting.(Do you want to code generate--select "Yes"
6.write the code for your project requirements(use c)
*Generate the .hex file to simulate in proteus:
1.after writting the code,then generate the hex file.
steps to generate the hex file:
1.select Project--properties--C/C++ Build--settings--MCU Post build outputs-
select "convert to binary file(-o binary)"
select "convert to Intel Hex file(-o iHex)"
Then select apply and close.
2.select the debug from the bottom window.
3.show the console display .
📢 Let's Connect:
For behind-the-scenes peeks, updates, and more, follow me on:
Facebook - / tahasan.hasan.3
Fb page - / tahsanhasan01
Instagram - / _tahsan_hasan
Twitter - / tahsanhasan01
Thank you for being part of this incredible journey. Together, we'll create a space filled with knowledge, entertainment, and positive vibes. So, hit that subscribe button, join the community, and let's make every moment count!
🔗 [Include any other relevant links or call-to-action]
What's app- 01642058067
G-mail- [email protected]