No Power on Videocon TV? How to Use a DSO and BIOS Programmer to Repair
Is your Videocon 22" LCD TV completely dead, with no standby light or power? This advanced guide shows you how to use a Digital Storage Oscilloscope (DSO) for signal analysis and a BIOS programmer for firmware repair. We'll walk you through diagnosing problems that can't be found with a simple multimeter, such as a corrupted BIOS or faulty signal lines.
In this video, you will learn:
Advanced Power Diagnosis: Use a DSO to examine power supply signals and clock signals for a dead motherboard.
Main Board Troubleshooting: Identify and analyze critical signals like the BIOS clock, data lines, and platform reset using the DSO.
BIOS Flashing: Use a programmer (like the RT809F or CH341A) to read the original BIOS, erase the chip, and write a new, known-good firmware.
Repair Verification: After flashing the BIOS, use the DSO again to verify that the necessary signals are now stable, confirming the repair.
⚠️ Safety Warning: This repair involves advanced techniques and working with high-voltage electronics. Do not attempt this unless you are an experienced technician with the proper tools and training.
LCD LED Training in Kolkata on 20 February 2026
Seat Booking are Started, Book it before seat get full
Call 9601991652