Honest Review - Artillery Hornet 3D Printer
In this video I unbox and review the Artillery Hornet 3D Printer, talk about its pros and cons, and look at all aspects of the printer. In the end, I give my honest opinion on this printer.
Chapters
00:00 Intro
00:27 Who is Artillery
00:58 Unboxing
03:52 Assembly
04:21 Looking at the mechanics
05:53 Repair
07:16 Looking at the electronics
09:45 Looking at the firmware
10:32 What's on the SD card?
11:25 PLA Printing
12:22 Printer and Cura
13:33 PLA Printing Results
13:52 Vase Printing
15:59 PETG Printing
16:58 Flex Printing
17:57 Conclusions
Helper site: https://next3d.ru/
We are on Zen: https://zen.yandex.ru/next3dprint
We are on VK: https://vk.com/next3d
We are on youtube: / @next3dprint
We are on rutube: https://rutube.ru/video/person/24801359
We are on TikTok: https://vm.tiktok.com/ZSd2WayjT/
Starter G-Code
---------------------------------------------------------------------------------
M220 S100 ;reset feedrate
M221 S100 ;reset flow rate
G90 ;use absolute coordinates
M82 ;absolute extrusion mode
G28 ;home
G1 Z2 F1500 ;raise z
G92 E0 ;reset extruder
G1 X75 Y5 F5000 ;start position
G1 Z0.28 F1500 ;lower z
G1 E4 F500 ;prime the filament
G1 X180 E10 F500 ;1st line
G1 Y5.4 F5000
G1 X75 E20 F500 ;2nd line
G1 Z2 F1500 ;raise z
G92 E0 ;reset extruder