#15 Arduino Interface With Temperature Sensor On Proteus Simulation 2021
#ECbtech वाला #diplomatech #D-tech
@dtechece
LM35 Interfacing with Arduino UNO
LM35 is a temperature sensor which can measure temperature in the range of -55°C to 150°C.
It is a 3-terminal device that provides analog voltage proportional to the temperature. Higher the temperature, higher is the output voltage.
The output analog voltage can be converted to digital form using ADC so that a microcontroller can process it.
For more information about LM35 and how to use it, refer the topic LM35 Temperature Sensor in the sensors and modules section.
code :
const int lm35_pin = A1; /* LM35 O/P pin */
void setup() {
Serial.begin(9600);
}
void loop() {
int temp_adc_val;
float temp_val;
temp_adc_val = analogRead(lm35_pin); /* Read Temperature */
temp_val = (temp_adc_val * 4.88); /* Convert adc value to equivalent voltage */
temp_val = (temp_val/10); /* LM35 gives output of 10mv/°C */
Serial.print("Temperature = ");
Serial.print(temp_val);
Serial.print(" Degree Celsius\n");
delay(1000);
}