Canon Pixma iP7250 Ink Error - Printer Reset
TECH TIP: Clean Canon Integrated Ink Cartridges: • Video
If you have installed 3rd party, aftermarket or refilled ink cartridges into your #Canon #Pixma #iP7250 #printer the #ink #cartridges smart chips might not be recognized. You may observe #LOW INK or INK MAY HAVE RUN OUT error messages, along with #RED X messages or #flashing RED #lights above each #cartridge. The ink level indicator may falsely report actual ink level condition.
To #BYPASS the displayed computer or printer #error messages you will need to #reset the printer to enable the new cartridges. Press OK, YES, or CLOSE to dismiss error #alerts.
If the POWER or LOW INK #INDICATOR light blinks and the printer stops printing, along with displayed error #codes 1600, 1683 or 1688, do not select CANCEL #PRINTING.
To RESET the printer, press the STOP/RESUME button which has a CIRCLE WITH A TRIANGLE inside, at either the Computer’s window prompt and/or on the PRINTER’S CONTROL control panel FOR 5-8 SECONDS until the LOW INK INDICATOR extinguishes, POWER LIGHT goes off and/or the printer resumes printing.
After the LOW INK, EMPTY or other error messages are bypassed INK TRACKING may return to normal and printing operations may resume. Please note that INK LEVELS may appeared greyed out, this is completely normal when using aftermarket or refilled ink cartridges.
CONTINUE TO PRINT until quality fades. Activate the printer’s SELF TEST or PRINT QUALITY pattern to check color output and general ink jetting performance.
If poor quality is observed the ink cartridge may need to be replaced or #PRINTHEAD #CLEANING may need to be performed. White steaks or lines may be visible in #documents or #photos; sometimes general CLEANING may not be enough, a #Canon DEEP CLEANING action may be required.
Supported Ink Cartridges:
PGI-250
PGI-250XL
PGI-255XXL
CL-251BK
CL-251C
CL-251M
CL-251Y
CL-251XLBK
CL-251XLC
CL-251XLM
CL-251XLY
Supported Printer Models:
Canon Pixma MX922
Canon Pixma MG5420
Canon Pixma MX722
Canon Pixma MG5450
Canon Pixma MX725
Canon Pixma MX925
Canon Pixma iP7220
Canon Pixma iP7250
Canon Pixma iP8720
Canon Pixma iP8750
Canon Pixma MG5520
Canon Pixma MG5550
Canon Pixma MG5620
Canon Pixma MG6320
Canon Pixma MG6350
Canon Pixma MG6420
Canon Pixma MG6450
Canon Pixma MG6620
Canon Pixma MG7120
Canon Pixma MG7150
Canon Pixma MG7520
Canon Pixma iX6820
Canon Pixma iX6850
NOTE: Leaving cartridges uninstalled for long periods of time will DRY OUT THE PRINTHEAD; immediately replace cartridges to protect PRINTHEAD performance. The internal PRINTHEAD is responsible for ink jetting and it may need to have the bottom or lower surface cleaned with several damp towels in order to recover #black and/or all #colors (#colours)
If DEEP CLEANING does not rectify a black or color printing issue then it suggested to manually clean the bottom surface of the PRINTHEAD (advanced recovery procedure), you will need to ACCESS CARTRIDGES and gently push printhead over several damp paper towels placed in the bottom of printer’s chassis.
Printing a couple times a week will ensure proper black and color ink jetting and overall printer performance over the life of the printer.
For #advanced printer #troubleshooting and recovery tips please refer to my other support videos. Uncle Hulka Channel: / @laurralynmike