Eurotech B446/Y2 CNC Multi-Axis Turn/Mill Center - MC# 402796
To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirmed prior to purchase.
Equipped With:
Approx Tooling
1) of 10.57.85.00 Cutoff tool holder cutoff shank .750”
(2) of MT 10.57.60.00 Radial Static Tool
(2) of Low Profile Radial Static Tool
(2) of Single axial stick holder
(1) of 42mm Sub Spindle Collet Chuck
(1) of 65mm Hainbuch Nova Quick Change Collet System
Fanuc 31i-Model A CNC Control, 8-axis (to be confirmed)
Spindle option for 2" cap
Full Length Parts Conveyor w/90 degree exit conveyor
Dual Turrets
Coolant-thru-the-turret option
(1) Renishaw Tool Setting Probes
Y-Axis on Upper/Lower Turret
5-High flow coolant pumps
Combination Chip Conveyor/Coolant-chip tank
Approx Hours :
Power On: 53,102
Run Time: 27,232
Cut Time: 16,858
General Specifications As Per Brochure (Please Verify Details):
Number of Axes: 8
Bar Capacity: 2"
Machining Diameter: 9.6"
Swing Over Diameter: 20"
Main Spindle
Spindle Speed: 5,000 RPM
Spindle Nose: 5"
Spindle Bore: 2.17"
Chuck Diameter: 8"
Motor Power: 20 HP
C-Axis Least Input Value: 0.001 Deg.
Sub Spindle
Spindle Speed: 5,000 RPM
Spindle Nose: 5"
Spindle Bore: 2.17"
Chuck Diameter: 6.5"
Motor Power: 15 HP
C-Axis Least Input Value: 0.001 Deg.
Clear Shift Travel: 4.72"
Upper Turret
Number of Stations: 12
Number of Static Tools: 96
Turret Indexing: 0.10
Number of Live Tools: 24
Live Tool Speeds: 4,000 - 60,000 RPM
Motor Power (30 Min Rating): 5 Geared
Lower Turret
Number of Stations: 12
Number of Static Tools: 96
Turret Indexing: 0.10
Number of Live Tools: 24
Live Tool Speeds: 4,000 - 60,000 RPM
Motor Power: 5 Geared
Cooling System Tank Capacity: 120 Gallons
Machine Dimensions: 173" x 85" x 89"
Machine Weight: 15,855
Equipped With:
Fanuc 31iT CNC Control, 8-axis (to be confirmed)
Spindle option for 2" cap
Spindle liner
FMB Turbo 5-55 Magazine Bar Loader (set up for 2" cap); w/ remnant retract
Full Length Vari-Speed Parts Conveyor w/90 degree exit conveyor
Dual Turrets
Coolant-thru-the-turret option
(2) Renishaw Tool Setting Probes
Y-Axis on Upper/Lower Turret
Sub Spindle
Main & Sub Spindle Collet Chucks
3-High flow coolant pumps
CoolBlaster Dual High Pressure Coolant System w/ Filter (1/turret)
Accu Chiller Coolant Refrigeration System w/ Filter
Combination Chip Conveyor/Coolant-chip tank
approx list of Tooling (to be confirmed)
(13) OD turning tools
(2) 2-position ID Tool Holders
(2) 4-position ID Tool Holder
(6) 1-position ID Tool Holder
(6) 1-position Rotary X-axis Mill-Drill Tool Holders
(4) Adjustable Z-axis Live Angle Tool
(4) Z-Axis Rotary Tools
(3) 2-Position X-Axis Mill/Drill Tools