Raspberry Pi and LCD All-In-One - Build it yourself
Built my own all-in-one computer.
Main components:
Raspberry Pi B Rev. 2 ( buy from element14.com / newark.com )
2.5 inch LCD panel (buy from adafruit.com, 83-14399, look for model 912)
Gorilla Glue or any epoxy glue
I glued the display on the top half of the Raspberry Pi case on the outside. Its driver/controller I placed on the underside.
The input is composite. On the Raspberry Pi, I removed the composite RCA jack. Then soldered the the LCD driver's input wires ( signal and ground) to the Raspberry Pi's composite output ( where the RCA jack used to be).
I also soldered two pins to P6 - the undocumented reset button connector on the Raspberry Pi.
Recorded 12/5/2013 and 12/7/2013