Radiolink AT9/AT9S pass-through RSSI on free channel to your flight controller
Hey everyone,
I have received a new firmware for Radiolink AT series transmitter allowing us to pass-through the RSSI value to the flight controller and onto your ground control station (Mission Planner, Betaflight, Cleanflight). Until now you could only see the RSSI signal strength on the display of your transmitter, which is in most cases unreadable outside, so this is a huge improvement, because now you can see the RSSI value on your OSD in your goggles or your FPV monitor or directly in your ground control station.
The only thing you have to do is flash the new firmware, in your transmitter go to Mode - AUX-CH and change one of the channels to RSSI.
In Mission Planner go to Full Parameter Tree - RSSI and change following values:
RSSI_ANA_PIN : 103
RSSI_TYPE : 2
RSSI_CHANNEL : Your selected channel
This is all, now you can display your RSSI in the Mission Planner and use it in your OSD.
Firmware download link (AT9): https://drive.google.com/open?id=0Bw6...
Firmware download link (AT10):
https://drive.google.com/folderview?i...
Link to Eachine Wizard X220:
https://www.banggood.com/Eachine-Wiza...
Link to ESC covers:
https://www.banggood.com/4-PCS-ESC-Pr...
Link to RunCam Swift 2:
https://www.banggood.com/RunCam-Swift...
Link to MATEK F405OSD Flight controller:
https://www.banggood.com/Matek-F405-O...
Link to Matek FCHUB-6S:
https://www.banggood.com/Matek-FCHUB-...
Link to silicone anti-vibration mounts:
https://www.banggood.com/10-PCS-Silic...
Link to Realacc Soft mount screws:
https://www.banggood.com/4-PCS-Realac...
If you like my videos, please like and subscribe.
If you like to help me with my hobby or just want to buy me a beer, please use this link: http://paypal.me/rdvorsky
Thank you.
Banggood link above is an affiliate link. I receive a small commission if you use it.