Implementation of Per VLAN STP & VLANs to prevent the loops & enhance security in layer 2 network.
learn CCNA from cisco projects .
implementation of Per VLAN STP & VLANs to prevent the Loops & enhance security in layer 2 network projects is explained and the topics covered in this project is given below.
this video is helpful for the people who are preparing for CCNA & cisco related projects as well as networking based interview related.
based on this knowledge student they can build their own mini or major projects.
----------------------------------------------------------------------------------------------------
Topics & configuration commands given below for the reference.
Topics covered:
=========================
vlan creation & configuration of access & trunk ports
verification of vlan in campus network
implementaion of spanning tree protocol in cisco switches
configuration of stp per vlan basis(pvstsp+)
implementations of portfast & bpdu guards
verifications of pvstp+ & bpdu guard & portfast in a campus network
==========================================================
Networking commands
---------------------------------------
vlan 10
name hod
vlan 15
name faculty
vlan 20
name students
int fa0/10
switchport mode access
switchport access vlan 10
int fa0/15
switchport mode access
switchport access vlan 15
int fa0/20
switchport mode access
switchport access vlan 20
on s0:
int range fa0/1,fa0/4
switchport mode trunk
switchport trunk allowed vlan 1,10,15,20
on s3:
int range fa0/1-2
switchport mode trunk
switchport trunk allowed vlan 1,10,15,20
on s2:
int range fa0/2-3
switchport mode trunk
switchport trunk allowed vlan 1,10,15,20
on s1:
int range fa0/3-4
switchport mode trunk
switchport trunk allowed vlan 1,10,15,20
for PvSTP+ commands please watch the video.
#b.tech projects #projects #netwoking #ciscopackettracer #spanningtreeprotocol #network #iampraveenreddy #ciscopackettracer #ccnaprojects #b.tech mini projects