Connect Ignition to Modbus Device | Modbus Device Simulation
See how to simulate a Modbus TCP/IP device, communicate to the device from Ignition by Inductive Automation, and setup tags in Ignition to read Modbus registers.
Table of Contents:
1. Overview: 00:00
2. Simulate Modbus Device: 00:28
3. Connect Modbus Device to Ignition: 01:54
4. Create Boolean Tag Linked to 0x1 Register: 03:36
5. Create Boolean Tag Linked to 1x1 Register: 05:35
6. Create UInt16 Tag Linked to 3x1 Register: 06:23
7. Create UInt32 Tag Linked to 3x2 Register: 07:13
8. Create FloatSingle Tag Linked to 3x4 Register: 09:01
9. Create SInt16 Tag Linked to 4x1 Register: 09:47
10. Create SInt32 Tag Linked to 4x2 Register: 10:27
11. Create FloatDouble Tag Linked to 4x4 Register: 11:10
12. Closing: 11:55
For more Modbus related tutorials and products, please go to www.scadamatic.com.