How To Fix (Hard Bricked) Dead Xiaomi Phone | Using EDL Method | No Box
Hey Guys Sorry For Late Uploading
Here Is The Guide How to Fix Dead Xiaomi Phone Using Xiaomi FlashTool, Not Need Of Box Like MIRACLE.
#Redmi
#Mi
#Fix_Hard_Bricked_Phone
#Software_Flash
#Firmware_Flash
#Deep_Flash
#Mi_Tool_Flash
#Li_Nex_Neo
So all Guys I Have Mentioned All The Steps, Watch it Very Carefully.
Of You Even Cant Understand My words.. Watch And Listen to Voice Again Again. You will Understand. & Sorry For The RIP English.
Things You Need :
1. Download USB Drivers
2. Download XiaoMi FlashTool
3. Install Them
4. download Your Fastboot ROM
5. Extract The Rom
6. Open Xiaomi FlashTool Select The ROM Folder
7. Connect Your Phone VIA My Method & Click Refresh
8. Now The Last Step Hit The Flash Button.
Notes: While Selecting Your Rom Folder Make Sure You Select The Folder That is Before The IMAGE Folder With ROM Name.
While Flashing If You Receive Message "Cannot Receive Hello Packet" Then Hold The Two Test Points Attached For 2 or 3 Minutes After You Have Hit The Flash Button.
Or
If You Have Plugged in The USB Cabel And Got The Error Message Then Disconnect And Reconnect The USB Cabel while Still Holding The Two Test Point For 2 or 3 Minutes, After You Have Hit The Flash Button. So I Think You Have Understand very Well. My English Is RIP. So Focus The Words.
Download Links:
Qualcomm HS-QLoader 32Bit: https://androidfilebox.com/download/115/
Qualcomm HS-QLoader 64Bit: https://androidfilebox.com/download/118/
Mi FlashTool Latest 2017 : https://xiaomiflashtool.com/download/...
Here is The Link For #How To Fix Xiaomi FlashTool "Cannot Receive Hello Packet" :
• How To Fix Xiaomi FashTool Error "Can...
Also Watch : #How_To_Fix_Stuck_at_Bootloop :
• How To Fix Bootloop | Fix Soft Brick ...
The Part 2 of " #Cannot Receive Hello Packet Part 2 " is here : • Fix Error "Cannot Receive Hello Packe...
Follow Me On:
Instagram: @ujjwal.murmu
Facebook: Facebook.com/ujjwal.murmu.1044
Eamail- [email protected]