How to program ESP 8266 WIFI Module using Arduino IDE
In this basic esp8266 esp-01 tutorial video, I have shown you how to program ESP8266 or ESP01 using Arduino UNO.
During the video, I have shared the Arduino ESP8266 board connection and all the required settings in Arduino IDE for uploading code to ESP01 using Arduino UNO or any USB to Serial interface board.
Software To Design PCB
https://www.altium.com/yt/msexperiments
useful links
ESP 8266 01
https://amzn.to/3d0IFpX
ESP-01 ESP8266 USB UART PROGRAMMER
https://amzn.to/3vClBV0
ESP8266 ESP-01 Serial WiFi Wireless Adapter Module 3.3V 5V Breakout
https://amzn.to/3d2H4zV
Setup the Arduino IDE
Download Arduino IDE. https://www.arduino.cc/
Open you IDE and click on "File - Preferences".
In "Aditional Boards Manager URLs" add this line ( http://arduino.esp8266.com/stable/pac... )and click on "OK": ...
Go to "Tools - Board - Boards Manager", type "ESP8266" and install it.
Go againt to "Tools - Board" and select "Generic ESP8266 Modul
How to program ESP8266 ESP-01 with Arduino UNO and FTDI232.
In this video, I have used only example codes, which will be available after downloading the ESP8266 board as shown in the video.
I have also explained different errors, you may get while uploading the code to ESP8266 using Arduino and how to resolve those errors. So if you follow all the steps shown in this video, then you can easily program the ESP8266-01 board for different IoT projects.
Important points to remember while programming ESP01
1. Connect GPIO-0 with GND for programming mode.
2. After uploading the code disconnect GPIO-0 from GND then press the RESET button.
3. If any connection error occurs, disconnect Arduino from Laptop and try again.
4. While getting Connecting......_____, Press the RESET button on ESP8266
Please let me know if you face any problem while programming the esp8266-01 board.
#ESP8266Arduino
Instagram: / ms_experiments
Latest projects playlist
• Arduino UNO basic programming
#Altium #Octopart #JLCPCB #OurPCB