Blade 400 3D 2 Flights, 2 cams & 2 Sounds!
UPDATE july 2020.
**Watch in High Quality! By request for
"full sound" of the Blade while flying. (*Listening to your Heli is another important part of the learning curve!)
Here's my Blade 400 DX 8 Gen 2 setup parameters
Swash type 3 servos 120 deg
Servo travel, all 100%
Servo direction: Thro-Normal, Ail- normal, Ele-Normal, Rudder-Reverse, Gyro-normal, Pitch, Reverse, Ax 2 Normal, AX 3 Normal
Throttle curve Normal mode. 1-0%,3-25%,3-50%,4-75% 5-100%
3d, all at 95%
Pitch curve Normal mode 1-30%, 2-50%,3-62%, 4-80%, 5-100%
Pitch curve 3D switch on. 1-10%, 2-25 %,3-50%, 4-75%, 5-90%
No expos.
This can vary, but works. Here is a video of my latest Blade 400 using these exact settings.
• This "Frankenstein" Blade 400 heli was res...
The video is from 2 different cameras at the same time. The Sony GC-1 is held by Jeff and the Aiptek PocketCam X is on board my Blade 400 helicopter. It is still flying strong, but 6.5 minutes it the absolute max it flies on the stock 1800 LiPo battery as I have found from the many times I have flown it. (So set your timers) Hope you enjoyed this. Stay tuned for more as I next do the Firebird Phantom with the Aiptek vid cam on board it again.