INTERNAL RH AND LH THREAD MILLING BY CLIMB METHOD ON VMC || VMC PROGRAMMING

Опубликовано: 12 Март 2026
на канале: CNC VMC TECHNOLOGY (SAJWAN SIR)

1,617

hi folks,
in this video i am going to explain you how to thread mill by climb method RH or LH thread x,y,z axis moves and i ,j values and tool cutting directions and properties.

O104
( FANUC I&J, LH, CLIMB, INTERNAL THREAD MILLING )
( THREAD - PITCH 1.5 MM, DIAMETER 14 MM, DEPTH 20 MM )
( TOOL RADIUS COMPENSATION D1 = 0 )
N1 T1 M06
G90 G00 G54 G40 G17 G94 X0.000 Y0.000 S1608 M03
G43 H1 Z50.000 M08
( PASS NUMBER - 1 )
G90 G01 Z-6.312 F5000 1
G91 G41 D1 X1.025 Y-1.025 Z0.000 F9
G03 X1.025 Y1.025 Z-0.188 I0.000 J1.025 F9 2
G03 X0.000 Y0.000 Z-1.500 I-2.050 J0.000 3
G03 X-1.025 Y1.025 Z-0.188 I-1.025 J0.000 4
G01 G40 X-1.025 Y-1.025 F5000
G01 Z-10.125 5
G91 G41 D1 X1.025 Y-1.025 Z0.000 F9
G03 X1.025 Y1.025 Z-0.188 I0.000 J1.025 F9 6
G03 X0.000 Y0.000 Z-1.500 I-2.050 J0.000 7
G03 X-1.025 Y1.025 Z-0.188 I-1.025 J0.000 8
G01 G40 X-1.025 Y-1.025 F5000
G90 G00 Z50.000
M30
%

thanks for watching
#CNCVMVTECHNOLOGY