CNC programming || radius calculation by I and k || radius calculation in CNC program

Опубликовано: 30 Сентябрь 2024
на канале: CNC VMC TECHNOLOGY

17,887

328

Radius calculation by I and k in CNC program,
The I, J and K arguments specify the DISTANCE from the ARC START POINT to the CENTER POINT of the arc. Note that the start point of the arc is NOT GIVEN in a G02 or G03 command. The start point is determined by the location of the cutter when the command is implemented. Also, the center point is never given explicitly in the command. I, J, and K are DISTANCES.

MORE INTERESTING VIDEOS ON CNC VMC TECHNOLOGY
#CNCVMCTECHNOLOGY,
#cncprogramminginhindi

setting work offset on cnc milling machine vmc
   • VMC programming  || setting work offs...

Work offset by edge finder tool and reference tool
   • cnc programming || Work offset by edg...

G75 grooving cycle in CNC machine
   • cnc programming || G75 grooving cycle...

constant surface speed g code, G50,G92,G96,G97
   • cnc programming || constant surface s...

setting work offset on cnc milling machine vmc
   • VMC programming  || setting work offs...

G54, G55, G56 WORK OFFSET SETTING IN VMC
   • cnc programming || work offset in vmc...

G43,G44,G49 tool length compensation in VMC machine
   • cnc programming||G43,G44,G49 tool len...

Sub program calling in vmc machine
   • VMC programming||Sub program calling ...

Ball pin roughfing with canned cycle G71
   • cnc programming||Ball pin roughfing w...

G70, G71 canned cycle for turning and finishing
   • cnc programming || G70, G71 canned cy...

G32/G33 thread cutting in CNC lathe machine
   • cnc programming || G32/G33  thread cu...

G94 facing rough cycle
   • cnc programming ||vG94 facing rough c...

Tool nose radius compensation G40,G41,G42
   • cnc programming || Tool nose radius c...

CNC program G02,G03
   • cnc programming || G02,G03 cnc code N...

Tool tip orientation in CNC machine
   • Tool tip orientation in CNC machine N...

how to write first cnc program
   • how to write first cnc program  No-5

G- CODES FOR CNC LATHE MACHINE
   • G- CODES FOR CNC LATHE MACHINE No-4 |...

how to set work offset in cnc leath machine
   • how to set work offset in cnc leath m...

G81,G84 DRILLING AND RIGID TAPPING CYCLE
   • G81,G84 DRILLING AND RIGID TAPPING CY...

G81, G83 PECK DRILLING
   • G81, G83 PECK DRILLING No-1 || G83 pe...

G81 Drilling cycle || G81 canned cycle || G82 spot dilling
   • VMC programming in hindi No-0  || G81...