Alexmos 3 Axis Brushless Gimbal Controller DIY Box Assembled
More info:
http://aerialpixels.com/shop/gimbals/...
Fully Assembled Alexmos 3 Axis DIY Box. Box comes ready to plugin. LED Status indicator and Menu Bottom Hard Wired. Option to connect an external LED and menu button in parallel.
Alexmos 3 Axis board -- not stacked
Headers soldered
Copper High Dissipation heatsinks mounted
Custom 5 wire interconnect
12AWG or 14AWG power leads soldered and terminated with XT60 connector (Total 5 x Pairs Inlcuded)
Bluetooth Module Installed
Board flashed with the latest firmware, default settings loaded and tested for proper operation. NOT TUNED FOR ANY CAMERA
Various ferrite rings will be included
Box will mount using standard 2 axis board mounting pattern
Built-in Menu Button
Staus/Power LED
Power Switch
Alexmos Buzzer Included
Note: The Mounting pattern is 45mm (Standard Alexmos Board Hole Patttern). The 2 boards will need to be unscrewed from the box in order to mount the box. Enough slack provided to remove to the boards. Tuning to be done using Bluetooth module. The 2 axis board will have to be removed in order to access the USB port. If direct access to USB port is needed a whole will have to be drilled.
Music by:
Chris_Zabriskie - Temperature of the Air on the Bow of the Kaleetan