Weinzierl KNX IP Router 751
The KNX IP Router 751 with compact design has a width of only 1 module (18 mm) and is powered by the KNX bus. The device forwards telegrams between different KNX TP lines via LAN (IP) as a fast backbone and is an alternative to KNX line coupler. The KNX IP Router 751 can also be used in the ETS® as a programming interface. The KNX IP Router 751 has a full-range filter table and a large telegram buffer. The buttons and LEDs on the device allow a local diagnosis including the operating status and communication errors.
Controls and indicators
Housing: plastic
DIN rail mounted device
Width: 1 TE (18 mm)
Controls and indicators
2 buttons + KNX programming button
3 LEDs bicolor + KNX programming LED
Ethernet
10BaseT
5 KNXnet/IP Tunneling connections
KNX
Medium IP/TP
Filter table 8 kByte (64k group addresses)
Long Frame
Power supply
From KNX Bus, approx. 15 mA
Connectors
KNX connector
LAN RJ-45 socket
Simply send your request at: [email protected]
You can find more data here: https://weinzierl.de/index.php/en/all...
Feel free to have a look at our website: www.weinzierl.de