Making a DIY CNC Metal Lathe | The Lathe Chuck + First Tests | #6
This time I'd like to share with you some of my progress on my DIY CNC Lathe project where I mount the lathe chuck on the spindle. I also do some first tests of the axis movement, spindle runout. I made fly some chips too! At this moment this machine needs still improvements to be usable but I should be able to do this. Hopefully you will enjoy the video.
Check out also some more detailed videos about wiring the electronics:
Setup of stepper motors 👉 • How To Wire up Stepper Motors and Set Para...
VFD wiring 👉 • Connecting a 2.2kW AC Motor with VFD Sako ...
CNC Breakout 👉Board setup • Connecting Stepper Motors to CNC Breakout ...
VFD MACH3 setup 👉 • How To Setup a Spindle VFD Inverter With M...
Part 1 [The Frame] : 👉 • Making a DIY CNC Metal Lathe | The Frame ...
Part 2 [The Spindle]: 👉 • Making a DIY CNC Metal Lathe | The Spindl...
Part 3 [The Tool Post]: 👉 • Making a DIY CNC Metal Lathe | The Lathe ...
Part 4 [The X and Z Axis]: 👉 • Making a DIY CNC Metal Lathe | The X and ...
Part 5 [The Control Box]: 👉 • Making a DIY CNC Metal Lathe | The Contro...
Part 6 [The Lathe Chuck]: 👉 • Making a DIY CNC Metal Lathe | The Lathe ...
Subscribe and hit the like button if you like the video and want more!
If you have any questions - comment down below.
Thanks for watching!
00:00 Intro
00:22 Mounting belts on motors
01:39 Preparing the machine
02:33 Backlash tests
03:00 Preparing the spindle for the chuck
05:06 Chuck runout
05:18 Some overview shoots
06:15 First turning operation
07:08 Outro
Facebook Page 👉 / gbwmcnc
YouTube Channel 👉👉 / gbwmweldingmachiningcnc