Unlock your PC by Arduino using phone, RFID card or RFID tag (ATmega32U4, RFID reader)
In this short tutorial I'd like to explain how to make simple USB device which allows you to very quickly unlock your computer without keyboard. You will need only the Pro Micro microcontroler with ATmega32U4 (or Arduino Leonardo with this chip), RFID reader together with card and breadboard.
Note: For RC522 reader USE ONLY 3.3V version of Pro Micro. VCC is the voltage supplied to the on-board ATmega32U4. This voltage will depend on whether you’re using a 3.3V/8MHz Pro Micro or a 5V/16MHz version, it’ll be either 3.3V or 5V respectively (but for this project you need 3.3V version!) This voltage is regulated by the voltage applied to the RAW pin. If the board is powered through the ‘RAW’ pin (or USB), this pin can be used as an output to supply other devices.
For visitors and anyone who likes the video:
Since youtube made the rules for the new youtubers more difficult, please subscribe to support the funding of this channel. Thank you!
Library:
Arduino RFID Library for MFRC522
https://github.com/miguelbalboa/rfid
Sketch:
https://gist.github.com/xxlukas42/bfc...
Where to buy:
RFID reader
http://s.click.aliexpress.com/e/RfyJiA6
Pro Micro microcontroler
http://s.click.aliexpress.com/e/NvZ3ZN7