Side-by-Side Comparison: The Mars 2 Pro & Mars 3 Print Results
Sometimes you just need to see whether or not there's any difference in results between two machines to know if you're going to pick one over the other, and in the case of these two entry-level Elegoo printers there's just enough difference to be visible if you squint. For me, the real difference is in the bigger build plate on the Mars 3 - definitely a selling point even if the print quality doesn't matter to you that much!
Check out the Mars family of printers direct from Elegoo here: https://www.elegoo.com/collections/ma...
My most important print settings are here:
Resin: Elegoo Water Washable Grey
Layer Height: 0.030mm
Bottom Layer Count: 5
Exposure Time: 2.100s
Bottom Exposure Time: 30s
Light-Off Delay: 9.500s
Lifting Speed: 25mm/min
Anti-Aliasing on, Grey Level 3 with no Image Blur.
Thanks to Producer Patrons Alan Nuttall, Kyrie Crawford, Trainboy, Jimmy, and Rod - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
/ sonicsledgehammer
/ sonicsledge
/ sonicsledgehammer
https://ko-fi.com/docwholigan
http://exit23.games