How To Import A Model From CATIA V5 To ANSYS Workbench 15 0
How To Import A Model From CATIA V5 To ANSYS Workbench 15.0?
Import a model from CATIA V5 to ANSYS Workbench 15.0: CATIA and ANSYS are the two biggest software in the field of design and analysis.CATIA can be used in the high-end applications like Aerospace whereas ANSYS can be used for perfect analysis of a part or product. In this article, I am going to explain How to Import a model from CATIA V5 to ANSYS Workbench 15.0.
A step by step procedure is to be adopted to Import a model from CATIA V5 to ANSYS Workbench 15.0 and is as follows.
Import A Model From CATIA V5 To ANSYS Workbench 15.0-Procedure:
To import a file from CATIA to ANSYS Workbench, the model is to be prepared in CATIA so as to analyze it in ANSYS Workbench
The file is to be saved in .igs format.
Now it is to be imported from the workbench.
Click on the Generate button.
The model is to mesh now so that the model is to be divided into a number of partitions.
Whenever the load is applied on the model, the load is divided by the number of partitions so as to get the uniform load on the system.
loads are applied to get the deformation of the model.
The material is to be checked for deformations.
If the stress developed in the material is less than the yield point then it is of safe. If it is of vice-versa then we have to optimize it to bear the maximum load.
.
via: / @anindyasengupta
...
via:
/ @catiav5ansys373
.
#simulation #computationalfluiddynamics #computeraideddesign