Sram AXS Button upgrade / Quickshift Installation
https://leapcomponents.com/product/qu...
The best upgrade for your axs setup!
Better ergonomics than the standard button and the Rocker paddle from Sram.
Saver and faster shifting because your thumb can stay under the bar.
With thumbnail shifting you can even shift while operating your brake at the same time.
music by:
"LAKEY INSPIRED - Chill Day" is licensed under a Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
Music provided by BreakingCopyright: • [Non Copyrighted Music] LAKEY INSPIRED - C...
LAKEY INSPIRED
/ lakeyinspired
https://www.youtube.com/channel/UCOmy...
https://open.spotify.com/artist/3zDGj...
0:00 Introductie
0:36 Remove the original button by unscrewing the main axle with a 3mm hex key
0:51 Remove the outer screw with Torx 10
1:02 3: Place the new Leap Quickshift body
1:20 4: Place the longer Leap screw with Torx 10
1:37 Place the new Leap front button on the shifter Spring is not necessary (but can be installed if you like more resistance)
2:02 Test if all the functions are working. if all is working fine, proceed to step 9
2:31 Remove the contact disc from the front button with a small flathead driver
3:01 Push the Leap axle cover in the hole