Polylok 24" IPEX Pipe to 24" IPEX Pipe Adapter Ring - Part Number: PL-24IPA
Installation Instructions on the Polylok 24" IPEX Pipe to 24" IPEX Pipe Adapter Ring (Part Number: PL-24IPA).
Step 1: Prime both mating surfaces with PVC primer. Apply primer to the inside wall of the IPEX pipe and on the opposing mating surface on the outside of the PL-24IPA adapter.
Step 2: Cement both mating surfaces generously with heavy or extra heavy bodied PVC cement. Apply cement to the inside wall of the IPEX pipe and on the opposing mating surface on the outside of the PL-24IPA adapter.
Step: 3 Place the PL-24IPA adapter into the IPEX pipe while the PVC cement is still wet. Give the adapter a quarter turn and hold it in place for a few moments to set it in place.
Repeat steps 1-3 when attaching a second piece of 24" IPEX pipe to the Polylok PL-24IPA adapter.