How to Install Raspbian on Raspberry Pi Using Windows 10
This video shows how to install Raspbian on an SD card from Windows 10. It can also be used for the other operating systems in the NOOBS package.
I am using the Raspberry Pi 3B+: https://amzn.to/2Tnsc0l and recommend using a 2.5A minimum power supply, such as: https://amzn.to/2G0wcku I usually use whatever SD cards I can get cheaply, but recommend minimum 8GB and class 10, here's an example of a good cheap option: https://amzn.to/2MHJkvb If you need recommendations for good compatible Pi hardware just leave a comment below.
To download the operating system image, go here: https://www.raspberrypi.org/downloads...
I downloaded the Raspbian Stretch Desktop version, but if you don't need the desktop environment you can download the Lite version to just use command line. You can also choose the NOOBS installer which also includes LibreElec. Any of these opt
After the image is downloaded, you will also need to download etcher: https://www.balena.io/etcher/
Run etcher, and then once it opens use the farthest left option to select the Raspbian image you downloaded.
The most important option is the center, where you select what drive to install to. Double check that you select the correct drive. Whichever drive you select will wiped, and all data will be deleted to install Raspbian on that drive.
After you have selected your drive and the image, hit flash and let it run it's course. This should take 5-30 minutes.
Once the flashing process is finished, you can put the SD card back in the Raspberry Pi, and plug it into a monitor, keyboard, and mouse. It should then boot up to the Raspbian Desktop and you'll be good to go.
Check out my facebook at: / 198429346974010
or my twitter: / allhow2s
Or my website where I have a lot of other great tutorials (such as how to take a screenshot, or how to get the start button back on Windows 8): http://www.allhow2s.com