How to solution error code: E066-0001 E066-0002 Canon image RUNNER ADVANCE 6275

Опубликовано: 04 Октябрь 2024
на канале: Tech Humayun kabir

34,943

324

C5535i C5540i C5550i C5560i C5230 C5235 C5240 C5245 C5230 C5035 C5040 C5045 8795 2645i 2630i 2625i 4551 4545 4535 4525 6055 6065 6075 6255 6265 6275 8085 8095 8105 8205 8505 8585 8595 6555 5555

Code: E066-0001

Description:
Pre-transfer Charging Shutter HP open error. The
Pre-transfer Charging Shutter Sensor (PS95)
detects that the shutter is opened although it is
moved to the close position.

Remedy:
1. Check the position of the Pre-transfer Charging
Shutter. 1-A. In the case that the Pre-transfer
Charging Shutter fails to operate (stopped at HP
at front side) Check the connection of the Pre-
transfer Charging Wire Cleaning Motor (M7).
Sensor side: J3108, J3089 (relay), PCB side:
J3088 (relay), J114 (Main Driver PCB (PCB2)) 1-B.
In the case that the Pre-transfer Charging Shutter
is stopped at rear side (close operation position)
1-B-1. Check that the Primary Fan Duct is closed.
Close the Primary Fan Duct. 1-B-2. Check
movement of the pin to push the Pre-transfer
Charging Shutter Sensor (P$95). Replace the Pin.
1-B-3. Check movement of the flag on the Pre
transfer Charging Shutter Sensor (PS95). Replace
the flag/ spring. 1-B-4. Check the connection of
the Pre-transfer Charging Shutter Sensor (PS95).
Sensor side: J2114, J3215 (relay), J3067 (relay)
PCB side: J3066 (relay), J130 (Main Driver PCB
(PCB2)) 1-C. In the case that the Pre-transfer
Charging Shutter is stopped along the way 1-C-1.
Check abrasion of the Slider Pin. Replace the
Slider Pin. 1-C-2. Replace the Pre-transfer
Charging Assembly. 2. Replace the DC Controller
PCB (PCB1).
★ ★ ★ ★ ★ ★

Code: E066-0002

Description:
Pre-transfer Charging Shutter HP close error. The
Pre-transfer Charging Shutter Sensor (P$95)
detects that the shutter is closed although it is
moved to the open position.

Remedy:
1. Check the position of the Pre-transfer Charging
Shutter. 1-A. In the case that the Pre-transfer

Charging Shutter fails to operate (stopped at HP
at front side) Check the connection of the Pre
transfer Charging Wire Cleaning Motor (M7).
Sensor side: J3108, J3089 (relay), PCB side:
J3088 (relay), J114 (Main Driver PCB (PCB2)) 1-B.
In the case that the Pre-transfer Charging Shutter
is stopped at rear side (close operation position)
1-B-1. Check that the Primary Fan Duct is closed.
Close the Primary Fan Duct. 1-B-2. Check
movement of the pin to push the Pre-transfer
Charging Shutter Sensor (PS95). Replace the Pin.
1-B-3. Check movement of the flag on the Pre-
transfer Charging Shutter Sensor (PS95). Replace
the flag/ spring. 1-B-4. Check the connection of
the Pre-transfer Charging Shutter Sensor (PS95)
Sensor side: J2114, J3215 (relay), J3067 (relay)
PCB side: J3066 (relay), J130 (Main Driver PCB
(PCB2)) 1-C. In the case that the Pre-transfer
Charging Shutter is stopped along the way 1-C-1
Check abrasion of the Slider Pin. Replace the
Slider Pin. 1-C-2. Replace the Pre-transfer
Charging Assembly. 2. Replace the DC Controller
PCB (PCB1).
#canon advance #Toshiba e-studio #sharp #konica minolta #develop #kyocera
#TechHumayunkabir

/ techhumayunkabir

/ humayun61