DTC Suzuki P2195 Short Explanation

Опубликовано: 17 Июль 2026
на канале: Maxidot Jeep
72
2

The video focuses on the basic Suzuki specific diagnostic error code.
Contents:
0:21 Basic DTC analysis according to OBD2 protocol standard.
1:48 Insight into programming
an explanation of what a bit is and how a byte is formed
decoding the Error Code to the base programming
2:58 A diagnostically understandable description of the Diagnostic Trouble Code
3:05 Basic error definition
Possible causes or errors of the car and its parts describing the mentioned error

We will continue to work on improving the content.
Our efforts at Maxidot s.r.o.the video content gets better.

#maxidot #dtc #howto #diagnostictroublecode #suzuki




Make:
Suzuki
Code:
P2195
Definition:
LOST COMMUNICATION W or RIGHT SIDE SATELLITE ACCELERATION SENSOR 2
Description:
The Occupant Restraint Controller (ORC) continuously communicates with the Right Side Impact Sensor 2 over the sensor signal circuit. The sensor communication and on board diagnostics are powered by the ORC signal. This code will set, if the ORC and the Right Side Impact Sensor 2 do not establish and maintain valid data communications. The DTC will become Active after the fault has set for nine seconds. The DTC will go to Stored after the ORC to Right Side Impact Sensor 2 communication has recovered for four seconds. The DTC can clear within this ignition cycle
Cause:
(R18) SIGNAL CIRCUIT SHORTED TO BATTERY(R18) SIGNAL CIRCUIT SHORTED TO GROUND(R18),(R20) RIGHT SIDE IMPACT SENSOR 2 CIRCUITS SHORTED TOGETHER(R20) RIGHT SIDE IMPACT SENSOR 2 GROUND CIRCUIT OPEN(R18) RIGHT SIDE IMPACT SENSOR 2 SIGNAL CIRCUIT OPENOCCUPANT RESTRAINT CONTROLLER (ORC)