Samsung Double Door Inverter Fridge Error Codes/ Testing ! Hindi ! Working Principle
Samsung Double Door Inverter Fridge Error Codes/ Testing ! Hindi ! Working Principle
Samsung double door inverter fridge error codes are displayed on the fridge's LED display. The error code will be a series of letters and numbers, such as 1E, 21E, or 85C. Each error code corresponds to a specific problem with the fridge.
To test for error codes, you can enter diagnostic mode. To do this, press and hold the top left and top right buttons on the display for 8-10 seconds, or until the screen flashes and a chime sounds. If an error code is present, it will be displayed on the screen.
Here is a list of some common Samsung double door inverter fridge error codes and their descriptions:
1E: Condenser fan error
2E: Evaporator fan error
3E: Defrost sensor error
4E: Temperature sensor error
5E: Ice maker error
6E: Ambient sensor error
7E: Compressor error
8E: Main control board error
85C: Door open alarm
88 88: All eights error (requires service)
If you see an error code on your fridge's display, you can try the following troubleshooting steps:
Reset the fridge. To do this, unplug the fridge for 30 seconds and then plug it back in.
Check to make sure that the fridge is properly leveled and that the doors are closing properly.
Clean the condenser coils and evaporator fan.
Check the temperature sensors and defrost sensor for any damage.
If you have an ice maker, check the water line and ice maker valve.
If you have tried all of the above troubleshooting steps and the error code is still present, you will need to contact a qualified appliance repair technician.
Testing Samsung double door inverter fridge error codes
Here are some specific steps you can take to test for some of the most common Samsung double door inverter fridge error codes:
Condenser fan error: Check the condenser fan to make sure that it is spinning freely. If the fan is not spinning, it may need to be replaced.
Evaporator fan error: Check the evaporator fan to make sure that it is spinning freely. If the fan is not spinning, it may need to be replaced.
Defrost sensor error: Use a multimeter to check the continuity of the defrost sensor. If the sensor is not continuous, it will need to be replaced.
Temperature sensor error: Use a multimeter to check the resistance of the temperature sensor. If the sensor is not within the specified resistance range, it will need to be replaced.
Ice maker error: Check the water line to make sure that it is not clogged. Check the ice maker valve to make sure that it is opening and closing properly.
Ambient sensor error: Use a multimeter to check the continuity of the ambient sensor. If the sensor is not continuous, it will need to be replaced.
Compressor error: If the compressor is not running, it is likely that it is defective and will need to be replaced.
Main control board error: If the main control board is defective, it will need to be replaced.
Important: If you are not comfortable testing or repairing your fridge yourself, it is always best to contact a qualified appliance repair technician.
#fridge #error #codes #testing #tutorial #appliances #ariskaservices #repair