Velociraptor AnyCubic Chiron 3d print
Set of videos that go over my experience with the AnyCubic Chiron 3D printer.
Unboxing, building, Setting up, programming and my first prints. I also have a Anycubic Delta, linear Plus printer -
So, after a couple years - I decided it was time to UPGRADE! : )
So, If you like these glimpses into my learning and use of 3D printers; you should get one :)
Just be sure to do a lot of research before buying one.
They are not one size fits all, The are NOT ready to print perfect prints right out of the box.
But, with a little work, they can be not only great fun, but a great educational tool -
and, you get to make really cool things!
Still, that cable for the hot end, there are only 9! wires in each 'wire'! I am, and suggest you do as well - make a NEW one!
Use IDE pc ribbon cable, an old VGA cord - anything that's got at least 28 to 24 gauge wire in it and at least four feets long
ALL CREDITS go to JEFF BRODERICK for the Bantam Mount - And Dual 40mm Fangs -
https://bantam.design/mount
And, Eliot ht -
https://www.thingiverse.com/thing:354...
The TMC 2208's that I am using -
https://www.amazon.com/dp/B07DXM6Z92/...
Buy the Anycubic Chiron Here - https://www.3dprintersbay.com/anycubi...
Buy the Anycubic Delta here - https://www.amazon.com/Anycubic-Upgra...
Firmware and all software / information can be found here - Chiron -
http://www.anycubic3d.com/support/sho...
Firmware and all software / information can be found here - Delta -
https://drive.google.com/open?id=0B8V...
Slicer that I use Cure 4.5 -
https://ultimaker.com/en/products/ult...
AnyCubics Build video - Delta -
• Playlist
3D prints / ideas / objects -
http://www.thingiverse.com/search?q=a...
ZYL Tech Filament site - That I use exclusively on my Chiron printer
https://www.zyltech.com/login.php
WYXWorks 1.75mm Filament - That I have used exclusively on my Delta printer -
https://www.amazon.com/s/ref=nb_sb_no...
And now the SKS board has come out! new file format and programmer needed?!