My custom self sourced Voron 1.8 3d printer
#3dprinter #voron #3dprinting
I made a custom Voron 300x300 based on the V1.8 using parts from a Kywoo Tykoon Max and some other parts I had spare. The motion system is from the V1.8 with the rails on the top so the rods can be attached to the frame. The bed is mounted to a custom frame and motion system with dual steppers made on my Workbee CNC cut from 4mm Aluminium and it worked out so much better than I had imagined.
/ @nero3d
/ @modbotarmyy
/ @mandicreally
https://vorondesign.com/
https://www.onetwo3d.co.uk/
00:00 intro
01:00 why I chose the Voron 1.8
03:00 Buying the cheapest frame from Aliexpress
04:45 my design for the Z and Bed system using rods and bearings.
05:30 CNC cut A and B motor mounts
05:50 Voron 1.8 motion system.
06:00 CNC Tap
06:54 Top access panels to the electronics
08:35 MKS SKIPR touch screen problems
09:16 pre heating for TAP
10:17 don't buy cheap fans for hi speed printers.
11:10 running a print with the new fans and clean first layers
13:17 showing a clean print before Input shaper.