Silo Exercise 3 Part 1
Alter or re-write your program so that the panel mounted Selector switch can be
utilized to select one of 3 different modes of operation. The 3 modes shall operate as
follows:
When the selector switch is in position "A", the system shall
operate in the "Continuous" mode of operation. This is the mode
of operation which was used in Exercise #1.
When the selector switch is in position "B", the system shall
operate in the "Manual Restart" mode of operation. This is the
mode of operation which was used in Exercise #2.
When the selector switch is in position "C", the system shall
operate in the "Fill Bypass" mode of operation. In this mode,
the boxes will simply move down the conveyor continuously
and bypass the fill operation. As in the other modes, the Start
and Stop pushbuttons will control the conveyor motion and the
Run Lamp will operate as expected